After some time of operation of the iPhone, as in the case of any technology, there may be some malfunctions of a component. However, do not despair and immediately take the device to a service center, because many such problems can be fixed yourself. If your iPhone does not see charging, but you have already tried to use another cable and it did not work, then the way out of this situation may be to clean the charging port from dust and dirt that has accumulated there. This procedure can be performed without the use of any special devices, the main thing is to do everything carefully and slowly.
Is your iPhone charging port blocked? Here's how to clean it
The design of the case of any iPhone model does not provide for the presence of a protective cover of the charging port, so even with careful handling of the phone, over time, dust and dirt will accumulate there. Regular cycles of connecting the Lightning cable to the socket squeeze out this unwanted content, which can eventually close the charging contacts and break the correct connection, or completely deprive the smartphone of the ability to charge. In the case of new iPhones that support wireless charging, this problem is less relevant, but still not exclusive.
To avoid a situation in which you have to learn how to repair the iphone charging socket, it is necessary to keep the phone and the charging cable clean and regularly check the contacts for foreign objects. Some even find it difficult to imagine how much dirt and various hairs can accumulate there, which in itself complicates the correct connection of contacts. At the same time, it is quite simple to carry the device in your pocket, so do not think that such situations occur only in those who do not treat the equipment properly.
To clean the iPhone charging port, you can use whatever you have on hand, such as a paper clip to open the SIM card tray that comes with the phone. Apple does not recommend the use of compressed air cans, because in such aerosols the air comes out under high pressure, and it can damage other components of the device, including violating its water resistance. However, to clean the charging port from sticky dirt and debris, compressed air is not the most effective solution.
As already mentioned, there is nothing complicated in the procedure of removing dirt from the charging port of the iPhone. You can use a SIM key or other similar object, a regular toothpick, a hairpin or a paper clip. When using a metal object, you should be more careful, because there is a risk of damaging the charging connector, after which you will have to carry the phone to a service center. If you decide to clean the charging port of the iPhone, take care of the flashlight in advance, it will help you clearly see how much dirt is left in the connector, and when you can stop cleaning.
How to clean a charging port
First of all, you need to turn off the iPhone, you must do it, because security is paramount. Next, turn on the flashlight and check the connector for foreign objects, keeping in mind that dirt and various hairs especially accumulate in small grooves located along the port on each side. Then use a toothpick or any other thin object to clean the port and try to remove as much dirt as possible, this may require repeating the procedure several times, because dry dirt is unlikely to give in easily. You do not need to put a lot of pressure, because you risk damaging the contacts, and in general, for the success of this procedure will be much more important accuracy and perseverance. In the case of older iPhone models that use a 30-pin connector.
And so, for self-cleaning of the connector for charging iPhone you will need:
- Good lighting or flashlight;
- Toothpick, match or paper clip;
- Cotton rag or ordinary cotton disc (wound on the tip of a toothpick and thus prevents mechanical damage to the contacts, can be further impregnated with alcohol).
Of course, if your phone stops charging, you do not need to immediately start "digging out" the dirt from the charging port, because this is not always the reason. To get started, try using a different cable or connecting the iPhone to another USB port, so you can immediately find out that the charging problems are not caused by a breakdown of the charger.
If charging is not included in the iPhone socket, it can also be referred to a specialized service center, but it is important to understand that a professional wizard will solve this problem in the same way as described above, but you will have to pay for it. Of course, if you are not sure of your capabilities, this option will be better, in addition, in some running cases, you may need to replace the charging socket on the iphone 5s or any other iPhone model.
If cleaning the port does not solve the problem, and the iphone still does not see charging, and you have already tried several Lightning cables, but it did not work, then it will be impossible to do without the help of qualified masters. Sometimes such charging problems indicate a malfunction of the power management chip or a failure of the battery itself.
As we found out, cleaning the iPhone charger is not a difficult procedure, but it is quite troublesome. You can also use the same method to clear the ports of other devices, such as iPad or Mac, as well as smartphones from other manufacturers. If there is a problem with the sound mode through the headphones, the same manipulations can be performed with the USB connector. In fact, the banal cleaning of ports from dirt and lint often helps to get rid of problems with charging the device, because you do not always need to immediately seek professional help, because some problems can be solved by yourself and without the use of specialized equipment and tools.