High-quality repair of the vibrating in the iPhone 6 in 15 minutes
iPhone smartphone models are rightly considered reliable and prestigious. At the same time, these are not cheap gadgets, their cost is several times higher than the price of the flagship models of popular and well-known brands in the budget niche. But, like other devices, the iPhone is not safe from situations where one careless movement can plunge an expensive device into the "abyss of water", or, escaping from his hands, the gadget will go on a short flight, and under the influence of gravity will make a hard landing at your feet.
Quite often, such adventures leave only external evidence that the smartphone was in an unusual situation, but sometimes there are problems with the internal filling of the gadget. In such cases, the vibrator motor of the iPhone 6 often fails. Its replacement is one of the services provided by the specialists of the ICOOLA service center.
What is responsible for the vibrating in the iPhone 6
The smartphone in our hands during the day usually emits several hundred or thousands of vibrating signals. But mobile phones did not immediately get a useful feature due to the solid size and inability to provide them with fairly reliable power supplies. Few people know that the first vibrating was used in 1954 by a Swiss company that produces toothbrushes. With the development of microelectronics, the "sensitive function" has become so common that we can no longer imagine a smartphone without it.
The design of the vibrator motor is simple, there is a tiny electric motor on the shaft of which a cylinder with a center offset is mounted. The signal is applied to the motor windings, when touching the screen, receiving calls, typing drives the axis, and due to the eccentricity of the cylinder, there are vibrations, which we feel.
The Taptic Engine tactile response module has become an integral part of most gadgets manufactured by Apple, including smartphones. The new unit uses a slightly different principle - electromagnetic induction.
Stages of repair in the iPhone 6
Failure of the vibrator motor is almost invisible to the gadget but causes discomfort to users who are accustomed to the fact that the gadget responds to touch and calls with slight oscillations. Breakdowns of the vibrating mechanism of Apple iPhone 6, as, however, and many other wearable gadgets, are standard, and are caused, first of all, by conditions of their operation. The most common problems are:
Hitting the mechanism of vibration of dust and dirt particles, which lead to overload and failure of the sensor;
Destruction of elements of detail owing to mechanical action on the device case (falling, blow, etc.);
Corrosion phenomena caused by excessive moisture on the parts or prolonged stay of the owner in conditions of excessive humidity;
Violation of contact in the circuit of connection of the vibration sensor to the power supply.
To open the case and replace the defective part, you will need a tool adapted to work with the design of the smartphone. This requires tweezers, scapulae - CPT, and a mediator. To replace the part you need to buy a new unit.
The sequence of works on repair of the vibrator motor in the iPhone 6 looks as follows. The customer transfers the device to the ICOOLA service center, where our specialists inspect and diagnose the smartphone, determining the cause of the fault. The case is carefully opened with a screwdriver and auxiliary tools, the protective screen is removed at the junction of the display cables, which are disconnected, and the touchscreen is set aside so as not to damage it when replacing the part. The vibrating motor in the iPhone 6 is located under the battery and is fastened with two screws, unscrewing which, you can remove it from the smartphone. Replacement of the Taptic Engine module and assembly is carried out in reverse order.
The price of repair of vibrating motor iPhone 6 in Lviv
Looking for a reliable service center to service your iPhone? ICOOLA is the best that the service market in Lviv has to offer. We have certified masters with a high level of qualification and extensive experience to service this brand of phones. By contacting our service, you will appreciate the benefits of working with our company:
Carrying out of operative diagnostics;
The standard protocol for repair work in accordance with the manufacturer's requirements;
Loyal pricing, affordable cost of services;
Warranty on branded spare parts and components;
Execution of repairs urgently;
As a rule, our specialists diagnose the defect within half an hour. Payment for services is formed from the cost of spare parts and the work of the master. In Lviv, the replacement of the vibrating motors with an iPhone 6 starts from UAH 200.
Is it possible to repair the vibrator of the iPhone Six yourself?
Many "craftsmen" believe that the block collapsible design of the device is a direct invitation to "dig" in its interior, and thus get the result, the exact opposite of what is desired. Not only that, it is not possible to eliminate the defect detected "by eye", after assembling the "handmade", the phone begins to mess with other functions. But the fact is that the reason for this behavior of the device is not so obvious, and to eliminate it still has to turn to experts.
Those, in turn, find the cause of "illness", the elimination of which usually results in a tidy sum. Question: Is it worth opening an expensive smartphone in the pursuit of dubious savings? In our opinion, the answer is obvious, so the ICOOLA service center offers the services of highly qualified specialists at affordable prices. We work quickly, with a guarantee of quality.
Reviews about Replacing vibrating motors (Taptic) in iPhone 6
0 Message text
Write a reviewBy submitting a review, you agree with - site rules
Trade in request
Thank you for filling out the form! Our manager will contact you shortly!