Replacing the display module (original) with an iPhone X.
The iPhone X was able to catch the attention of many Apple fans in a short time with its large screen, multifunctionality and thin bezels. The developers have done everything so that the smartphone consists of heavy-duty materials that can protect it from various damages. However, like any other, this technique is prone to fail. Quite often, a service center is contacted to replace the display module with an iPhone X. The display is the weak point of any touchscreen device. The slightest fall can lead to breakdown and not always an ordinary user will be able to understand what exactly happened to the phone. It is in this case that the masters from the service center can come to the rescue.
What is the iPhone X display module made of?
Popular touch technology companies have moved to solid screens. These devices differ in the integrity of the touchscreen and display. But, during the repair process, it is possible to replace only the glass separately. The display module consists of the following components:
Glass touch layer. As a rule, it is this part that is most often broken;
Polarizing film. In this case, an analogue can also be used, namely, an adhesive gel that has similar properties. It helps the glass to fit more closely to the display;
The matrix. This is the part most commonly thought of as a display.
It should be borne in mind that the cable refers to the display, since it is he who connects the entire module with the smartphone. If the loops are of poor quality or do not work well, then they will need to be completely changed. This service is not cheap. And this lies in the fact that this component is almost impossible to solder. Therefore, it is necessary either to completely change the module, which comes with the loops, or only these parts.
What causes problems with the display module on the iPhone X?
Replacing the display module with an iPhone X is often necessary if the screen malfunctions. Damage of this kind can be associated with a variety of problems and symptoms. If the device does not display a picture, then this may be due to problems with the following components:
Defect in the matrix;
Breakage of the loop associated with a break or other reasons;
Failure in software.
The functionality of the display module components is checked if:
The screen is dark or the picture is dull. Such faults indicate defects in the rear suspension.
If the gadget works in normal mode (there is a ringing sound, vibration works), but the screen does not turn on - the loop is faulty or the controller is defective.
Only a white screen is displayed and nothing else. In this case, the matrix is completely inactive, but the backlight works. The main reason for all this is a malfunction of the display module loop.
If during the conversation the screen turns off, and the keys are pressed arbitrarily, then this is a sign that the proximity sensor is faulty.
Most often, a complete replacement of the display module with an iPhone X, and not individual components, is necessary due to mechanical stress. For example, cracks appear on the screen of a gadget, caused by a strong impact or fall. They can partially affect the operation of the sensor or completely block the functions of the smartphone. There are many other problems that lead to the need to replace the screen, as a rule, the following signs indicate this:
Screen image is completely distorted;
Color rendering is impaired;
A black screen or critical screen brightness appears;
Cracked screen or other mechanical damage.
The reason that led to the breakdown and the need to replace the display module can be found out in the process of diagnostics carried out by the service center.
How is the display module replacement process carried out?
The process itself is not complicated if it is carried out in a service center. It will consist of the following sequence:
The master disassembles the device by unscrewing the two lower bolts. For this, a specialized screwdriver is used;
The next step is to warm up the phone. This is done so that the factory gluing does not interfere with removing the display;
The wizard proceeds to fully open the gadget. This is done with a knife and a plastic pick. For the safety of the process, the smartphone is opened from the left to the right;
Next, remove the protective panel, which is attached and held by five bolts. It is important at this stage not to confuse all the bolts, as some of them have different diameters;
The next step is to pull the battery away from the motherboard;
The technicians also disconnect the ribbon cable and display connectors from the voice speaker. At this stage, care is important, incorrect or abrupt actions can lead to the absence of some functions after the repair process;
After removing the old display, it is replaced with a new one. The wizard closes the body and screws all the necessary bolts to the place where they were originally.
It is not recommended to carry out these actions yourself, as this can harm the smartphone. At best, the display module will not fit badly. At worst, some features will be missing.
Advantages of replacing the display module in the ICOOLA service in Lviv.
Replacing the display module with an iPhone X requires care and implementation of all technological processes. In addition to all this, it will not be possible to carry out this repair at the highest level without professional equipment. The ICOOLA service center will make this repair using special equipment. We employ only professionals who have more than 5 years of experience in this field. All the necessary tools are at the disposal of our employees, so we can carry out various repairs. We are not afraid of difficult cases and are ready to start work of any complexity. The ICOOLA service center is located at the city of Lviv, Kotsyubynskoho Street 25. We offer our clients:
Guarantee for services rendered for up to 1 year;
Work throughout Ukraine (we accept devices through Novaya Poshta);
Work without intermediaries;
Affordable prices for all types of repair services;
Free diagnostics, which will help to find out the reasons for the failure of the iPhone X and subsequent actions;
Only original high-quality spare parts that we always have in stock.
Our service offers not only high-quality, but also fast repairs. Due to the fact that we have all the parts in stock, our specialists begin repairs immediately after the arrival of the smartphone. On average, the process takes 15-30 minutes. Experts are ready to perform any work, taking into account the wishes of the client. Therefore, we are waiting for you in our service in the near future.
Reviews about Replacement iPhone screen X
0 Message text
Write a reviewBy submitting a review, you agree with - site rules
Trade in request
Thank you for filling out the form! Our manager will contact you shortly!