Replacement Wi-fi (chip) in the iPhone 8

Repair and replacement of the Wi-fi chip for iPhone 8.

We have all known for a long time that a mobile phone is not just a device for telephone conversations, but also a device for free access to the Internet. In order to connect to wireless networks, the iPhone Eight has a special Wi-Fi module, which makes it possible to recognize available networks, transmit and receive data. At some point, a situation may happen that your smartphone simply stops finding networks, the Wi-Fi button is deactivated, and the connection speed has become much lower. In many situations, the cause of such a malfunction can be a breakdown of the Wi-Fi microcircuit. And this means that it is necessary to repair it or completely replace it. Without some experience, it will not be possible to solve such a problem, so it is worth contacting a specialized service center for an experienced master to check and repair your iPhone.

Why is there no Wi-Fi on iPhone 8 and what to do?

If the fact that you have lost Wi-Fi is not a problem with the Internet connection from the provider, then the problems should be looked for in the gadget itself. The first step that our professional masters carry out in this matter is a complete diagnostics of the device. By the way, it is carried out completely free of charge. Such a step makes it possible to understand exactly what is the reason for the breakdown of Wai-Fai, which components have suffered. Further, the wizard will directly determine the best solution to the existing problem - he will offer to restore the part, replace it completely, or repair the device). In practice, often disruptions in the work of Waifai occur due to the fact that for some reason the microcircuit has become unusable. Repair of the Wi-Fi iPhone 8 chip in our service center is done very quickly and efficiently - in most cases, solving the problem takes no more than 30 minutes. The price of the service is calculated individually, depending on the work required and the components used. To avoid such problems anymore, after repair it is necessary to protect the phone from liquids, temperature changes, and shocks. Periodic diagnostics for prevention will also be very helpful.

Reasons why you need to repair the Wi-Fi chip on the iPhone Eight.

There are such common reasons due to which the iPhone's Wi-Fi chip breaks:

• the tracks on the boards are damaged. These damage from mechanical impact (the phone fell, hit, or was repaired by a bad technician);
• water got into the device - this is the worst enemy of the iPhone. Corrosion immediately occurs, which very quickly touches the rest of the gadget, provoking short circuits;
• another likely reason is a factory defect. This problem occurs very rarely, but it is still possible;
• the microcircuit has simply worn out over time.

In such situations, it is necessary to make timely professional repair of the part, so you need to contact the service on time so as not to aggravate the situation.
Replacing the Wi-Fi chip on the iPhone 8 can only be done by an experienced craftsman who knows his job. Our company employs specialists with an average experience of working with Apple technology for over 5 years. To replace the microcircuit, you must completely disassemble the smartphone. This part is located on the motherboard, which is pulled out to perform the appropriate work. The microcircuit is removed by soldering with a soldering iron with a thin tip, and a new microcircuit is installed in the same way.

How is the repair of the Wi-Fi chip in the iPhone 8?

In order to solder microcircuits, the masters of our center use professional equipment, special tools and specific compositions (fluxes, soldering pastes, professional chemistry). Initially, the motherboard is placed on an infrared preheater. Next, the component to be dismantled is heated with a professional hair dryer to soften the solder. To prevent the neighboring components on the board from burning out, they must be insulated with thermal tape. The broken microcircuit is removed with a special vacuum tweezers. And the remaining solder balls are removed from the board, like carbon deposits. The most important additional material is stencils - universal, designed specifically for individual microcircuits. They are used to roll fresh balls with which a new microcircuit is attached to the motherboard. This process is called reballing or rolling, and it takes maximum concentration and experience to do it. After rolling, the microcircuit with balls is removed from the stencil and placed on the motherboard point by point. And the last step in such a repair is directly soldering the Wi-Fi iPhone chip.

Our company offers the maximum weekend conditions for the repair of Apple equipment.

Our service center has been pleasing customers for several years at Kotsyubinsky 25, in the city of Lviv. We offer our clients:

• prompt execution of all work - you will not need to leave your iPhone with us for a long time;
• free professional diagnostics of the device - we use only the latest equipment and tools;
• only original parts - we cooperate directly with suppliers, therefore we always have only the best spare parts in stock at affordable prices;
• provision of a guarantee for all work performed and components;
• reception even on holidays and weekends - you can contact us at any time convenient for you;
• free consultation from a specialist - the manager will answer all your questions directly by phone.