Each new gadget from Apple has more functionality, a better screen and a thinner display. Thanks to their lightness and thinness, smartphones are even more susceptible to physical and mechanical stress. If the gadget falls, and after that the screen does not respond, then it is necessary to replace the glass with the sensor with iPhone X. Sensor problems can arise for other reasons as well. To find out why the breakdown has occurred, only an experienced specialist can use professional equipment. It is worth considering that the repair of the iPhone X model is significantly different from the previous ones. If a gadget from Apple has crashed and the sensor does not work, then do not rush to buy a new phone. The service center will carry out all the necessary repair work and will try to return the gadget to normal operation.
Why is it necessary to replace the glass with a sensor on the iPhone X?
Quite often, after a fall or a strong blow, damage occurs, which is displayed not only on the external state of the phone, but also on the internal one. If, after an unpleasant incident, the glass was simply broken, then such a repair will be inexpensive. In case of poor touchscreen performance, repair work will be more difficult. A sensor problem can occur due to the following reasons:
The iPhone X sensor works only partially. This was due to a strong blow or fall. Because of this, not only the touchscreen could be damaged, but also the body of the gadget.
The microcircuit, which is responsible for the operation of the sensor, is out of order.
The screen does not respond due to moisture getting into the phone. If the smartphone was previously in the water, then after a while various breakdowns may occur, including the sensor may fail. This is due to the effects of corrosion on the iPhone X's parts.
Poor sensor controller performance. This leads to poor sensitivity.
During the repair process (replacement of the display or glass) non-original parts were used.
These problems can be displayed in different ways, primarily these are:
The phone freezes and the pressing process lags far behind the action itself.
The gadget does not respond well to touch or stops working altogether.
In some parts of the screen, the phone does not work and does not respond to touch.
All applications on iPhone X live their own lives. They turn on and off on their own, and at the same time, the screen does not always respond to key presses.
In order to exclude variants of a software failure, it is necessary to close all previously open applications and reboot the device. Also, you can remove recently installed programs that are especially suspicious. The thing is that software from an unknown manufacturer can have a bad effect on the operation of the phone.
How to avoid replacing glass with a sensor on iPhone X?
In order for the smartphone to be in order, there was no need to change the glass with the sensor, you must carefully use the iPhone X. In addition, it is recommended to take the following precautions:
Do not allow the phone to come into contact with moisture or stay in rooms with high humidity.
We recommend purchasing various security accessories. First of all, they include a cover. If you choose it correctly, it will protect your smartphone from mechanical damage and the phone will last much longer.
Protect iPhone X from various physical influences. To do this, you need to take care of all kinds of smartphone protection. Ordinary bumpers, protective films, glass and so on will help with this.
Sometimes the sensor can break for no obvious reason. The fact is that a software error or something else is possible and the owner of the iPhone X will not be able to influence this and take protective measures to prevent this from happening. But, he can make sure that breakdowns do not occur in the future. In order not to face repeated problems of a similar plan, you need to contact the service center. If you carry out repairs yourself, then this in the future may lead to damage of the same type. All this is due to the fact that it is quite difficult to find all the necessary parts on your own. In the service, the masters use only original components, and after the repair work, the owner of the gadget will be able to continue using the phone, as if there was no repair.
Stages of replacing glass with a sensor on iPhone X.
The process of replacing glass with a sensor on the iPhone X consists of several stages. All work requires care, accuracy and experience from the master. In addition, the availability of professional equipment plays an important role. The replacement algorithm in the service center has the following sequence:
Carrying out diagnostics. The wizard assesses the condition of the phone. It is determined what led to the breakdown and a repair plan is developed. At this stage, experts inform the client about the price for the service.
Old parts are removed. The display is removed and the old glue is removed. It is cleaned of dust and a new ball of glue is applied to it.
Installation of glass with a sensor. These components are installed using special equipment, as a result of which there are no bubbles on the device.
Drying process. Takes 15 to 30 minutes. At the same time, it is better longer, since otherwise the contacts will not close, and the sensor will not work.
Assembling the iPhone X. After drying, the remnants of the glue are removed, and the master collects everything back.
Final check. This stage is somewhat similar to the first, but here the glass is already whole. Testing is a mandatory process.
If you carry out this process yourself, then the owner of the iPhone X risks:
Break other components of the phone during the repair process.
Wrong selection of spare parts or purchase of non-original components, which in the future will lead to the need for repeated repairs.
Lose the manufacturer's warranty.
Spend a lot of money buying special tools.
Advantages of replacing glass with a sensor with an iPhone X at the ICOOLA service center in Lviv.
Replacing a sensor requires not only professional equipment, but also certain skills and professionalism. Moreover, unlike home repair, contacting specialists will provide you with a guarantee. In the ICOOLA service center, which is located in the city of Lviv at 25 Kotsyubinsky Street, the masters will conduct a free diagnosis. In the process, it will be found out what parts are needed for the repair. In addition, we guarantee:
Service from professional craftsmen with over 5 years of experience.
Using only original components during repairs.
Speed of all procedures (repair takes 15 to 30 minutes).
Work throughout Ukraine (we accept devices through Novaya Poshta).
Affordable prices for all services.
Work without intermediaries.
Our specialists are ready to take on the most difficult cases. The experts from the ICOOLA service center know what to do if the sensor on the iPhone X does not work and will do everything necessary for the phone to work and perform all functions.
Reviews about Replacement glass sensor iPhone X
0 Message text
Write a reviewBy submitting a review, you agree with - site rules
Trade in request
Thank you for filling out the form! Our manager will contact you shortly!
XДякуємо за замовлення!
Ви успішно оформии Розтермінування на суму на нашому сайті
Перейдіть до додатку Монобанк для завершення оформлення покупки
Дякуємо за замовлення!
Найближчим часом менеджер зв’яжеться із Вами для уточення деталей.